NOTE: CNC-ready machines cannot be operated manually until stepper motors are installed. The rotary tables can hold more weight when they are not under a continuous load. Click on the Video tab above to see examples of different weights and uses for our rotary tables. weight when suspended 12″ away from the center of the rotary table) This allows the table to be used as a 4th axis with CNC systems that have the capability to drive a rotary axis. Can I use the Y-axis accordion covers from my original mill No, they will not work with the new mill saddle and ball leadscrews. If your shaft size is different, we can probably accommodate you with a custom coupling. Our coupling has a 1/4 hole for the stepper motor shaft. The mount accepts a NEMA 23 frame size stepper motor for CNC control. Yes, if the stepper motors have a NEMA 23 frame, then they will fit on our stepper motor mount.

Vertical rotational torque-6 foot/lbs. The Sherline CNC Ready Rotary Table offers a P/N 3700 manual 4 inch rotary table and a stepper motor mount with dampened coupling in place of the handwheel.

NOTE: We are stating the following weight limits for our rotary tables for continual use.

Sherline provides stepper motors that are more than adequate for operations on a jobs done on a miniature machine tool.

3700-OP Rotary Table set up on a 3750 Tilting Angle Table (manual version is shown for reference). If you used a standard rotary table in the previously described set-up the handwheel would be mounted facing the backside of the X-axis. NEMA23 Cover with 4-pin connector set +13.50 NEMA23 Cover with 6-pin connector set +13.50 NEMA23 Cover with connector hole +10. The reverse mount allows access to the handwheel from the front of the machine (see photo below). Provides a neat, tidy connection for your stepper motors. The reverse rotary table is perfect for using on the tilting angle table (P/N 3750). The mount accepts a NEMA #23 frame size stepper motor for CNC control. Sherline has taken its P/N 3700-OP manual 4″ rotary table and applied a stepper motor mount with dampened coupling in place of the handwheel. About the Sherline CNC-Ready 4″ Reverse Rotary Table

Nema 23 coupler sherline